Snabb leverans Direkt från vårt lager 30 dagars återköp Prismatch Priser kontrolleras varje dag Säkra betalningar Pålitliga leverantörer
Leverans

Beställ senast 16:00 CET och vi strävar efter att skicka iväg samma dag.
Spårad - vi skickar dig länken när den har skickats.

Frakt utomlands?

Läs vår leveranspolicy för fullständig information
Returer

Behöver du returnera en vara? Börja här

Läs vår returpolicy för fullständig information
Vår prismatchning
Läs våra prisgaranti villkor för fullständig information
Betalning på ett säkert sätt
Läs våra betalsäkerhets svar för fullständig information

Red Paddle Co How-To Guides

Guides·

Red Paddle Co inflatable SUP board, Titan pump and Vario paddle from the how-to video guides

Concerned about getting to grips with the latest Red Paddle Co SUP boards and equipment? Never fear, Red Paddle Co have released these handy how-to guides to help you get pumped...


How to remove your valve

On the rare occasion that you need to remove your valve for cleaning or maintenance, Red's co-founder John Hibbard talks you through the process and the equipment required.



How to roll up your board

We were asked on our Facebook page how to pack a board into the bag with our new Titan pump. So we thought we would put a little video together to illustrate how easy it still is.




Adjusting your Vario paddle

Paddles come in either fixed, vario (adjustable) or 3-piece vario and we often get asked how to adjust your paddle length on our vario paddles. Here we explain how you can adjust each of the two systems to get the paddle length right for you.




How the Titan pump works

We often get asked how our new Titan pump works and how it can inflate our boards in half the time with half the effort. So we got the designer to go through the technical elements behind what makes this pump so awesome!




How to maintain your pump

We have designed our pumps to be simple to use and as maintenance-free as possible, but if you do need to maintain your pump, this is how to do it.




How to fit your RSS battens

By looking at how and where a board flexes, we have developed and patented the Rocker Stiffening System (RSS) to increase rigidity by up to 40%. It works by inserting stiffening battens along the rails of the board. The battens then work against the downward force of the rider to produce a stiffer board by preventing flex – similar to how a stringer works on a hard board. The stiffening battens are removable for easy board rolling and can be stored in the carry bag for transportation to and from the water.

This video shows you how to fit the RSS battens into your board.




How to pump

We often get asked what the best technique is for pumping up our boards, and as we have some experience in this field we thought we would put together a short How to Pump video!




How to fit your removable fin

Some of our more specialist boards come with a removable fin system. Here we show you how to fit these onto your board.




Find the latest products from Red Paddle Co over in our Stand up Paddle category.

Published on 27 september 2016 in Guides